Magnetic Acrylic Display Frames: A Buyer’s Guide for Retail & Events

Table of Contents

Magnetic Acrylic Display Frames: A Buyer’s Guide for Retail & Events

If you run a retail store, a brand booth, or a pop-up at a convention, you already know that display space is expensive real estate. You want a fixture that looks clean and premium, protects the print, and — most importantly — lets you swap the image when a new campaign drops without paying for the whole unit again. That is the job a magnetic acrylic display frame was built to do. This guide covers what they are, where they earn their place, the four specs to lock before you order, and what to check on a wholesale run.

What Is a Magnetic Acrylic Display Frame (and How Is It Different from a Standee?)

A magnetic display frame is two clear acrylic plates held together by small embedded magnets. Your printed artwork is sandwiched between the plates: no adhesive, no groove, no glue residue. Press the plates together and the magnets clamp the print flat and visible; pull them apart and you can replace the artwork in seconds. A standard acrylic standee, by contrast, is a single printed piece with a fixed design — when the campaign changes, the whole standee is replaced.

That one difference drives everything else: the frame is reusable, the artwork is swappable, and the print sits protected behind acrylic rather than exposed on the surface. For anyone who changes displays often, it turns a recurring cost into a one-time fixture.

Magnetic Frame vs Standard Standee
The differences that matter when you change displays often
Standard Acrylic Standee
🔒 Design: fixed, printed on the piece
🔁 Swap artwork: replace the whole unit
🛡️ Print: exposed on the surface
💰 Best for: one-off or long-run displays
Magnetic Display Frame ✦
🔓 Design: artwork sandwiched, swappable
🔁 Swap artwork: open, replace in seconds
🛡️ Print: protected behind acrylic
💰 Best for: frequent changes, repeat use

Where Magnetic Frames Earn Their Place

Magnetic frames shine anywhere the message changes but the fixture should stay. Think of them as reusable display real estate rather than a single campaign object.

Four Places Magnetic Frames Work Best
🏬
Retail Display
Counter and shelf promos that rotate with each season
🎪
Trade Shows
Light to ship, quick to set up, reused at every event
⚡
Pop-Up Shops
Swap the campaign board without rebuilding the display
✨
Limited & Collabs
Rotate limited drops and licensed character art cleanly

Four Specs to Lock Before You Order

Not all magnetic frames are built the same. Lock these four points with any supplier so the quotes you get are genuinely comparable.

Four Specs to Lock Before You Quote
Ask every supplier to answer these the same way
📏
1 · Size
Artwork slot size and the print area it actually shows
🧲
2 · Magnet Strength
Enough to hold the print flat without pinching or slipping
🪞
3 · Frame Finish
Polished edge, colour border, or printed frame design
🖼️
4 · Desk or Wall
Standing base, wall mount, or both — decide placement

Wholesale Buying Basics: MOQ, Lead Time, Custom Options

MOQ for a magnetic frame depends on the production method and how custom the frame is. A standard size with a simple printed insert usually carries a lower minimum; a fully custom frame — unique shape, a printed or coloured border, branded backing, or retail packaging — is set by that specific process. Ask for the MOQ per option rather than one blanket number, so you can plan a small test run and a full rollout separately.

For a standard bulk order, plan on roughly 10–15 days after the artwork proof is approved, depending on quantity and finishing. Custom shapes or special packaging can add time — build that buffer into a launch date around a convention or a store refresh. On custom options, confirm what can actually be changed: insert print, frame border finish, magnet layout, base or wall hardware, and packaging are the usual levers.

What Our Magnetic Frame Line Can Do

We print, cut, polish, and assemble in our own facility, so one team owns the project from prepress to packed carton. Our magnetic acrylic display frame line supports swappable printed inserts, polished clear edges or custom borders, reliable embedded magnets, and a choice of desk or wall mounting — so the same fixture can serve a convention booth this month and a retail window next season. Send us your artwork and placement requirements and we will confirm the specs, the MOQ for your chosen option, and a realistic lead time before we quote.

Frequently Asked Questions

Can I reuse the frame and only reprint the artwork?

Yes. That is the whole point of a magnetic frame — the acrylic plates are the reusable fixture, and the printed insert is the part you swap when the campaign changes.

Will the magnets hold the artwork flat?

When the magnet strength is matched to the plate size, the print sits flat and secure without adhesive or residue. Confirm the magnet layout for larger formats, where more holding points may be needed.

What artwork format do you need for the insert?

High-resolution layered files (PSD or AI) are best, with print size matching the artwork slot. Send any bleed or safety-margin requirements with the file.

How long does a bulk order take?

Typically 10–15 days after proof approval for standard options. Custom frames, borders, or packaging may take longer — we confirm the exact timeline before production starts.

Ready to Plan Your Magnetic Frame Order?

Tell us where the frames will be used, the artwork size, and how often you expect to swap the image. We will confirm the right specs, the MOQ for your chosen option, and a lead time that fits your launch — then get a sample in your hands before the bulk run.

Request a Display Frame Quote →

Submit Your Sourcing Request
RELATED POSTS
Custom Character Acrylic Standees: A Buyer’s Checklist for Anime & Game Merch

Custom Character Acrylic Standees: A Buyer’s Checklist for Anime & Game Merch If you source merchandise for an anime title, a game IP, or a retail character line, you already know the feeling: too many suppliers, too many vague quotes, and not enough straight answers. A spec you assumed was standard turns out to be an upgrade. A “sample” takes three weeks. This checklist is written to remove those surprises. It covers the five specs you must lock before you ask for a price, what a realistic proofing and lead-time timeline looks like, how MOQ actually works for character standees, and how to keep your IP yours. Why Character Standees Are the Steadiest Category in Anime & Game Merch Character standees keep coming back in buyer demand year after year, and for good reason. They are flat and light, so freight stays predictable even on a bulk order. They display themselves without extra fixtures. Unlike apparel, they carry no size runs and no sizing returns. For a license holder, a standee is a low-risk way to test how strongly a character connects with fans; for a retailer, it holds shelf space without tying up much capital. In our own inquiry

Read More >>
How to Prepare Artwork for Custom Acrylic Standees: A File Guide for Artists

How to Prepare Artwork for Custom Acrylic Standees: A File Guide for Artists You drew the character. You know exactly how it should look — the line weight, the eyes, that one highlight in the hair. Then the sample arrives, and something is off. The lines look soft. The colors are duller than your screen. There is a strange white halo around the edge. Most of the time, the problem is not the printing. It is the file. If you are an illustrator or indie artist making your first acrylic standee, this guide is for you. It walks through exactly how to prepare your artwork so that what you send is what you get — in plain language, with no design-school jargon. Why a JPG Straight From Your Drawing App Usually Fails Your drawing app shows your art at screen resolution — usually around 72 DPI. A printer needs about 300 DPI to produce crisp edges. A file that looks perfectly sharp on your monitor can look soft once it is enlarged to the size of a standee. A flat JPG causes three more problems: it compresses fine lines, it cannot hold a transparent background, and it merges your colors

Read More >>
How We Protect Your IP When Producing Custom Merchandise

How We Protect Your IP When Producing Custom Merchandise You spent months designing a character. Your artist poured real work into the line art, the color palette, the expression. Then, three weeks after your merch drops, you find the same character on a marketplace you have never heard of — printed cheaply, shipped from somewhere else, with no license and no credit. If you are in games, animation, or IP licensing, you already know this is not a rare story. It is one of the biggest reasons companies hesitate before moving production overseas. At BOCE, we manufacture custom acrylic merchandise for game studios, animation companies, IP owners, and the artists who draw the characters they love. We know your artwork is not just a file. It is the asset your whole business is built on. This article explains exactly what we do to keep it yours — from the first email to the sealed carton. Why IP Protection Has to Start Before Production Most IP leaks do not happen on the factory floor. They happen in the gaps: a design file emailed to a salesperson who forwards it to three factories, a subcontracted print shop that quietly keeps the artwork,

Read More >>

Leave a Reply

Your email address will not be published. Required fields are marked *

Get Started with Boce Today!

Contact us today, and our team will respond promptly. We are always dedicated to meeting your expectations and exceeding them. Fill out the form now!

Get free samples